一、核心功能：讓機械 “走得直、動得準”

1、 Core function: Make the machinery "walk straight and move accurately"

導軌與絲杠的配合，就像人類行走時 “腿骨” 與 “肌肉” 的協作：

The coordination between the guide rail and the screw is like the cooperation between the "leg bones" and "muscles" when humans walk:

導軌：機械的 “定向腿骨”

Guide rail: mechanical "directional leg bone"

導軌是一根或一對平行的金屬長條，表面經過精密加工，形成光滑的軌道，就像為機械鋪設的 “專用跑道”。它的作用是限制運動方向，讓機械部件只能沿著直線滑動，避免左右晃動或歪斜。例如，機床的工作臺下方安裝導軌，確保刀具在加工時沿著精確的路徑移動，不會因震動而偏離位置。導軌的材質多為高強度鋼材（如軸承鋼），表面經過淬火處理，硬度可達 HRC58-62，能承受數千公斤的重量而不變形。

A guide rail is a metal strip or pair of parallel strips, with a surface that has been precision machined to form a smooth track, like a "specialized runway" laid for machinery. Its function is to restrict the direction of motion, allowing mechanical components to only slide in a straight line, avoiding left and right shaking or tilting. For example, a guide rail is installed under the worktable of a machine tool to ensure that the tool moves along a precise path during machining and does not deviate from its position due to vibration. The material of the guide rail is mostly high-strength steel (such as axle bearing steel), which has been quenched on the surface and has a hardness of HRC58-62. It can withstand thousands of kilograms of weight without deformation.

絲杠：機械的 “動力神經”

Screw: the "power nerve" of machinery

絲杠是一根帶有螺旋凹槽的金屬軸，當電機帶動其旋轉時，凹槽會推動螺母做直線運動，就像 “把旋轉的力量擰成直線”。常見的絲杠有兩種：

A screw is a metal shaft with a spiral groove. When the motor drives it to rotate, the groove pushes the nut to move in a straight line, like "twisting the rotating force into a straight line". There are two common types of lead screws:

滾珠絲杠：凹槽內填充滾珠，旋轉時滾珠在螺母與絲杠之間滾動，摩擦力小、精度高，適合需要快速、精準移動的場景，如數控機床的進給系統，誤差可控制在 0.001 毫米以內，相當于一根頭發絲直徑的 1/70；

Ball screw: The groove is filled with balls, which roll between the nut and the screw during rotation. With low friction and high precision, it is suitable for scenarios that require fast and precise movement, such as the feed system of CNC machine tools. The error can be controlled within 0.001 millimeters, which is equivalent to 1/70 of the diameter of a human hair;

梯形絲杠：凹槽呈梯形，結構簡單、承載力強，適合載重較大但精度要求稍低的場景，如升降平臺的傳動系統，單根絲杠可承受數噸重量，但移動速度較慢。

Trapezoidal lead screw: The groove is trapezoidal in shape, with a simple structure and strong load-bearing capacity. It is suitable for scenarios with large loads but slightly lower precision requirements, such as the transmission system of lifting platforms. A single lead screw can withstand several tons of weight, but the moving speed is slow.

兩者配合時，絲杠提供動力，導軌確保方向，共同實現 “指哪動哪” 的精準控制。例如，3D 打印機的噴頭移動時，絲杠驅動噴頭前后左右移動，導軌則保證移動軌跡直線，確保打印出的模型邊緣整齊無偏差。

When the two cooperate, the screw provides power and the guide rail ensures direction, jointly achieving precise control of "pointing and moving". For example, when the nozzle of a 3D printer moves, the screw drives the nozzle to move forward, backward, left, and right, while the guide rail ensures that the movement trajectory is absolutely straight, ensuring that the edges of the printed model are neat and without deviation.

二、導軌的分類與特點

2、 Classification and characteristics of guide rails

直線導軌（滾動導軌）：

Linear guide (rolling guide):

內部有滾珠或滾柱，運動時滾動摩擦代替滑動摩擦，阻力小、精度高，適合高速運動。導軌兩側的防塵蓋能阻擋灰塵和碎屑，延長使用壽命，常見于精密儀器和自動化設備。

There are ball or roller bearings inside, and rolling friction replaces sliding friction during movement, with low resistance and high precision, suitable for high-speed movement. The dust covers on both sides of the guide rail can block dust and debris, extend the service life, and are commonly used in precision instruments and automation equipment.

滑動導軌：

Sliding rail:

導軌與滑塊直接接觸滑動，結構簡單、成本低，但摩擦力較大，需要定期潤滑，適合低速、重載場景，如大型機床的床身導軌，能承受數十噸的切削力。

The guide rail and slider slide directly in contact, with a simple structure and low cost, but with high friction and the need for regular lubrication. It is suitable for low-speed and heavy-duty scenarios, such as the bed guide rail of large machine tools, which can withstand cutting forces of tens of tons.

材質：

texture of material:

滾珠絲杠多采用高碳鉻軸承鋼（如 GCr15），表面鍍鉻或氮化處理，增強耐磨性；

Ball screws are often made of high carbon chromium bearing steel (such as GCr15), with surface chrome plating or nitriding treatment to enhance wear resistance;

梯形絲杠常用 45 號鋼或合金鋼，調質處理后硬度適中，兼顧強度與加工性。

Trapezoidal lead screws are commonly made of 45 grade steel or alloy steel, with moderate hardness after quenching and tempering treatment, balancing strength and processability.

本文由導軌絲杠友情奉獻.更多有關的知識請點擊:http://m.chgdqiyu.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message